Polycell Trade fillers have all been formulated specially for trade use, making them the ideal foundation for a great decorative finish.
A powder filler for indoor repairs to plaster, plasterboard, wood, brick, stone and most other building materials.
A powder filler which is based on high strength cement and special resins to promote powerful adhesion, toughness and impact resistance for exterior repairs.
A powder filler with excellent mixability, lump free and with good adhesion, for use both inside and outside. Will not shrink or crack and is easy to sand down.
The traditional favourite of decorators - a very high quality powdered interior filler.
Ideal for jobs that are too big for filling and too small for plastering. It creates the perfect surface for decorating in a fraction of the time.
A lightweight filler designed to fill deep gaps in one application without sagging or slumping - even on ceilings.
A ready mixed filler for interior and exterior use, it fills cracks in and around plaster, brick, stone concrete and stucco.
A ready mixed filler for filling minor imperfections like nicks, holes, dents and open woodgrain.
A fast and easy way to make minor repairs to interior surfaces. It can be used straight from the tube and sets in as little as 10 minutes*.
A two part plaster based filler that fills deep holes up to 50mm and dries to a structurally sound repair in just 20 minutes.
Polysmooth Easyskim is ideal for jobs that are too big for filling and too small for plastering. It creates the perfect surface for decorating in a fraction of the time.
Flexible, stainable, water-resistant and bonds strongly to wood.
A fast-setting two part filler for wood repairs which gives a long lasting durable finish. Once hard it gives an extremely tough, weather resistant repair.
Expands to fill large holes and gaps, inside and out.
Expands to fill large holes and gaps inside and out. Tested using the general principles of BS476: Part 20: 1987. A fire resistance of up to 240 minutes was achieved for a gap of dimensions 15mm wide x 220mm deep. Refer to test conditions of Warres Test Report no 117611.
Simple to use acrylic sealant ideal for internal or external use around skirting, stairs, windows and doors where movement occurs. It gives a smooth finish that does not require sanding.
Designed for the professional application of Expanding Gun Foam.
High performance and rapid-curing polyurethene foam.
Specially formulated for the cleaning of uncured foam from the applicator gun.