Products & Datasheets >
Dulux Trade >
Special effects >
Dulux Trade Duette Firstcoat |
|
Dulux Trade Duette Firstcoat |
Part one of a water-based system, providing a foundation colour upon which broken colour effects are based. |
Key information
Formulation |
Water-based |
Coverage |
Up to 17m² per litre on smooth surfaces of average porosity |
Touch dry |
After 2-4 hours dependent upon temperature / humidity. |
Pack sizes |
2.5L, 5L |
Thinning |
Brush or roller application: for sealing new or bare surfaces, 1 part of clean water to 5 parts paint.
For normal use: thinning should not exceed 1 part clean water to 10 parts paint. |
Location |
Interior |
Application |
Brush, Roller, Conventional Spray, Airless Spray |
Key benefits
- Specially formulated to give the correct level of absorbency for receiving and patterning the range of Duette Topcoats.
System information
After suitable preparation, apply 1 or 2 coats of Duette Firstcoat to the prepared surface. When the Duette Firstcoat is fully dry (2-4 hours), apply 1 coat of either Duette Topcoat or Duette Textured Topcoat. This must be applied to small areas at a time, using a conventional medium pile roller for the main areas. Use a small clean brush for cutting-in around edges etc. Stipple in the tops and edges with a small clean, dry brush. After application, the Duette Topcoat is patterned with one of the special Duette Rollers to give a soft broken colour effect.
To enhance the finish and provide further durability to the Duette system, apply 1 coat of Dulux Trade Clearcoat Matt or Satin.
After use, remove as much paint as possible from brushes before cleaning with clean water.
|
Downloads
|