| Products & Datasheets >
Cuprinol Trade >
Treatments and fillers >
Cuprinol Trade Wood Preserver Clear (T) |
 |
Cuprinol Trade Wood Preserver Clear (T) |
A general purpose preserver for the protection of sound wood against rot, decay and mould. It is suitable for horticultural and other structural timbers, and may be used indoors and outdoors. |
Key information
| Formulation |
Solvent-based |
| Coverage |
Brush / Spray: (2-3 coats)
4-7m² / litre interior - for sound wood
4-7m² / litre exterior wood - above ground
Dipping:
for at least 3 minutes.
Immersion (whole timber process): Immerse timber for 10-60 minutes |
| Touch dry |
Dependent upon temperature / humidity |
| Recoatable |
Recoat before previous coat is dry |
| Pack sizes |
2.5L, 5L, 25L |
| Thinning |
This product should not be thinned. |
| Location |
Interior, Exterior |
| Application |
Brush, Conventional Spray |
Key benefits
- Long lasting protection.
-
Deep penetrating.
-
Does not affect colour of wood when dry.
-
Can be painted, stained, varnished or polished when dry.
System information
To get the best results wood should be clean, free from bark, dirt and any surface treatment such as paint or varnish.
Flood all surfaces, paying particular attention to end-grain and joints to ensure maximum protection. Apply two or three liberal coats before the previous coat is dry. The more preserver is used, the better is the protection achieved. One flooded spray coat is equivalent to one brush coat and should be applied using a low pressure, coarse (nonatomising) compression spray.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.
|
Downloads
  |
